IMPORTANT - SHIPPING Update : 2020 august 6th The Japan Post has announced a restriction in the shipping service. Please check if your country is in the list at the checkout. Thank you all for your incredible support and please stay safe during this challenging time!

Layout and squares

Sort by:
Filter
SHINWA Machinist square Brass and stainless steel 62021 6cm

SHINWA minisukoya TRY square Brass

¥1,195

Shinwa TRY Square 6 cm, 7.5 cm, 9 cmMade of stainless steel and brass. Size 6 cm 62021 : 60 mm x 45 mm x 6 mmWeight : about 30 gramsAccuracy : ± 0.06 mm or less per 60 mm Size 7,5 cm 62022 :75 mm x 52 mm x 6 mmWeight : about 45 gramsAccuracy : ± 0.07 mm or less per 75 mm Size 9 cm 62023 :90 mm x 60 mm x 6 mmWeight : about 50 gramsAccuracy : ±...


More Info
SHINWA Square Layout Miter ruler 45 + 90 Degrees 62113 aluminum Japan Japanese tool woodworking carpenter

SHINWA Square Layout Miter 45 + 90 Degrees 62113

¥1,695

Shinwa layout square miter ruler 62113 for45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 73 mm x 63 mmWeight : about 100 gramsMade of aluminum, light and durable.  Made in Japan.


More Info
SHINWA Square Layout Miter ruler 45 + 90 Degrees carpenter 62081 stainless Japan Japanese tool

SHINWA Square Layout mitre 45 + 90 Degrees 62081

¥1,795

Shinwa carpenter layout square miter ruler 62081 for 45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 100 mm x 15 mmWeight : about 220 gramsMade of stainless steel.  Made in Japan.


More Info
SHINWA sliding angle bevel 150mm 250mm

Sliding bevel

From ¥1,295
SHINWA sliding adjustable angle bevel 150mm open japan

SHINWA sliding angle bevel 150mm 250mm

¥1,295

Shinwa 150 mm 250 mm sliding bevel 150mm 62596 : Size : 182 mm x 14 mm x 20 mmWeight : about 110 grams 250mm 62598 :Size : 250 mm x 19 mm x 20 mmWeight : about 200 gramsMade of stainless steel.


More Info
SHINWA 11215 Stainless Carpenter's Framing Square 30cm Made in Japan

SHINWA 11215 Framing Square 30cm

¥2,495

Shinwa Framing square 11215 Well deep-etched readable graduation on both sides.Outside : 300 mm x 150 mmInside : 250 mm x 100 mm Accuracy : ± 0.1 mm or less per 100 mmTotal size : 320 mm x 160 mm x 2 mmWeight : about 140 gramsMade of stainless steel.Made in Japan.


More Info
Marking gauge Kebiki with 2 blades

marking gauge

¥2,295
Marking gauge Kebiki with 2 blades Japan Japanese tool woodworking

Marking gauge Kebiki with 2 blades

¥2,295

Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them.  It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...


More Info
SHINWA precision Try Square 62009 stainless steel Japan japanese

SHINWA precision Try Square 62009

¥1,895

Shinwa Try square 62009. Well deep-etched readable metric graduation on both sides.Size : 175 mm x 100 mm x 8 mmWeight : about 110 grams Accuracy : ± 0.1 mm or less per 100mmMade of stainless steel.


More Info
SHINWA 300mm measurement moulage gauge ruler profile form contour model 77971 Japan Japanese tool woodworking

SHINWA 300mm moulage gauge model 77971

¥5,295

Japanese 300 mm Shinwa moulage gauge profile 77971. This is the big model. Size : 300 mm x 150 mm x 31 mmWeight : about 1 kgNeedles : 150 pieces x 1 mm (150 mm long)Maximum size you can copy : 293 mm x 106 mm Made in Japan.


More Info
SHINWA Protractor No.19 198mm ⦰90mm Stainless steel 62490 Japan Japanese tool

SHINWA Protractor No.19 20cm Stainless steel 62490

¥1,695

Shinwa 62490 20 cm protractor.Size : 198 mm x 50 mm x 15 mm⦰90 mmWeight : about 80 gramsMade of stainless steel.


More Info
SHINWA 100mm caliper calliper ruler precision 0.1mm 19518 Japan Japanese tool

SHINWA 100mm caliper ruler 0.1mm 19518

¥1,495

Shinwa 100mm caliper 19518 0-100 mm with a precision of ± 0,1 mm  Size : 155 mm x 52 mm x 4 mmWeight : about 40 gramsMade of stainless steel.


More Info
SHINWA sliding adjustable precision angle bevel 60cm 17.7" 62662 aluminum Japan Japanese tool

SHINWA sliding angle bevel 60cm 62662

¥4,995

Shinwa 60 cm sliding bevel 62662. Lock the desired angle and transfer it easily from one piece to another. You can also use it as a saw guide.It open to the right and to the left.Degrees scale and metric scale. Size (closed) : 650 mm x 30 mm x 28 mmWeight : about 460 gramsMade of aluminum.  Made in Japan.


More Info
Marking gauge Kebiki with 2 blades Japan dual cutter Fujiwara tool Japanese woodworking

Marking gauge small Kebiki with 2 blades

¥2,495

Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain.  It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.


More Info