SHINWA 10435 Carpenter's Square with magnets
Related Products
SHINWA minisukoya TRY square Brass
SHINWA minisukoya TRY square Brass
¥1,295
Shinwa TRY Square 6 cm, 7.5 cm, 9 cmMade of stainless steel and brass. Size 6 cm 62021 : 60 mm x 45 mm x 6 mmWeight : about 30 gramsAccuracy : ± 0.06 mm or less per 60 mm Size 7,5 cm 62022 :75 mm x 52 mm x 6 mmWeight : about 45 gramsAccuracy : ± 0.07 mm or less per 75 mm Size 9 cm 62023 :90 mm x 60 mm x 6 mmWeight : about 50 gramsAccuracy : ±...
SHINWA Square Layout Miter 45 + 90 Degrees 62113
¥1,895
Shinwa layout square miter ruler 62113 for45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 73 mm x 63 mmWeight : about 100 gramsMade of aluminum, light and durable. Made in Japan.
Marking gauge Kebiki with 2 blades
¥2,695
Small japanese Kebiki marking gauge with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. The advantage of the blade is that it cuts the fibres, whereas a needle tears them. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Si...
SHINWA precision Try Square 62009
¥1,995
Shinwa Try square 62009. Well deep-etched readable metric graduation on both sides.Size : 175 mm x 100 mm x 8 mmWeight : about 110 grams Accuracy : ± 0.1 mm or less per 100mmMade of stainless steel.
SHINWA Square Layout mitre 45 + 90 Degrees 62081
¥1,895
Shinwa carpenter layout square miter ruler 62081 for 45 and 90 degrees angles.Well deep-etched readable graduation on both sides. Size : 168 mm x 100 mm x 15 mmWeight : about 220 gramsMade of stainless steel.
SHINWA sliding angle bevel 150mm 250mm
SHINWA sliding angle bevel 150mm 250mm
¥1,395
Shinwa 150 mm 250 mm sliding bevel 150mm 62596 : Size : 182 mm x 14 mm x 20 mmWeight : about 110 grams 250mm 62598 :Size : 250 mm x 19 mm x 20 mmWeight : about 200 gramsMade of stainless steel.
SHINWA pick up ruler 15cm 30cm
SHINWA pick up ruler 15cm 30cm
¥695
Shinwa Pick up scale ruler with well deep-etched readable graduation. The silver-colored finish reduces reflection on the surface and makes it easy to read. The end of the ruler is bent for an easier pick up.Made of stainless steel with an accuracy of ±0,15 mm Size 15 cm 13131 : 175 mm x 15 mm x 0.5 mm Weight : about 10 grams Size 30 cm 13134...
Marking gauge small Kebiki with 2 blades
¥2,895
Small japanese Fujiwara Kebiki with 2 adjustable single-bevel marking blades. They leave a very fine and tear-out-free mark without tearing the grain. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon.Size : 110 mm x 120 mm x 70 mm (4.3" x 4.7" x 2.7")Weight : 165 gramsMade in Japan.
SHINWA 11215 Framing Square 30cm
¥2,595
Shinwa Framing square 11215 Well deep-etched readable graduation on both sides.Outside : 300 mm x 150 mmInside : 250 mm x 100 mm Accuracy : ± 0.1 mm or less per 100 mmTotal size : 320 mm x 160 mm x 2 mmWeight : about 140 gramsMade of stainless steel.Made in Japan.
SHINWA Protractor No.19 20cm Stainless steel 62490
¥1,795
Shinwa 62490 20 cm protractor.Size : 198 mm x 50 mm x 15 mm⦰90 mmWeight : about 80 gramsMade of stainless steel.
SHINWA 150mm caliper ruler 0.05mm 19899
¥4,295
Shinwa 15cm caliper 19899 0-150 mm with a precision of :± 0,05 mm from 0 to 50 mm± 0,06 mm from 50 to 100 mm± 0,07 mm from 100 to 200 mm Size : 235 mm x 75 mm x 7 mmWeight : about 150 gramsMade of stainless hardened steel.
SHINWA 300mm moulage gauge model 77971
¥5,495
Japanese 300 mm Shinwa moulage gauge profile 77971. This is the big model. Size : 300 mm x 150 mm x 31 mmWeight : about 1 kgNeedles : 150 pieces x 1 mm (150 mm long)Maximum size you can copy : 293 mm x 106 mm Made in Japan.
